Stay up to date with the latest features and improvements
Version 2.6Latest
Golf maps, famous routes, a rebuilt Laser Slicer and a lunar calendar
2.6 adds two golf course presets and 227 famous routes to the Map Designer. The Laser Slicer is rebuilt: an STL can become stacked slices, interlocking waffle ribs or radial fins and rings, laid out on your own stock sheets. The new Lunar Calendar Generator makes a wooden moon phase wheel, and the whole site now reads in French and Italian as well as English and Spanish. Layers that cut their water out as holes show a hole in their Solid badge.
A Map Designer preset that opens on Morris Williams Golf Course in Austin, with greens and tees on the top layer, fairways and bunkers below and every lake cut through to a blue backplate. Cart paths are engraved into the land sheet. Search for your own club and the shapes come from OpenStreetMap.
A version for UV printers that opens on the same course. Each fairway is cut together with its green as one raised piece with a red pin printed on the green, and the tees, bunkers and paths print flat on the land sheet.
A moon phase wheel for any year from 2000 to 2100. Phases are worked out to the minute and placed on the date for your time zone, so a full moon just after midnight in Paris lands on the right day. Choose a window disc that shows the phases around today, a pointer arm that keeps the whole year visible, or a flat wheel. The top disc comes in Celestial, Minimal and Botanical styles with your own title and message, and the southern hemisphere setting flips the quarter moons. Engrave the title and message in any font from the library, or download a PNG of all the marks to UV print them instead of engraving.
Upload an STL and cut it as stacked slices, interlocking waffle ribs, or radial fins and rings. Every part gets an ID you can engrave, sits on your stock sheet size, and can be left out or downloaded on its own. Download one sheet as SVG or every sheet in a ZIP. The slicing runs in the background, so the page stays usable on big models.
Route layers can now draw a famous route: 227 long-distance trails, scenic drives, rivers, cycle routes, summit paths, pilgrim routes and marathon courses. Search for a place on the way, pick a route, and the map moves to frame it. The route's data credits go into your export.
6. MyLaserTools in French and Italian
Every page, tool and Learning Center guide, and the legal pages, are now in French and Italian. Choose the language at the bottom of any page.
Version 2.5
The Workbench, customizable community designs and editable templates
Community designs can now be customized. The Workbench is a code editor in your browser where you write a design in KerfScript for laser cutting, in OpenSCAD for 3D printing, or both, and the settings in your code become sliders, choices and text fields. Publish it and its page becomes a customizer: anyone can change the sizes and text, watch the preview update and download an SVG, STL or 3MF. Laser parts placed with at and rotate show up assembled in 3D, so you can check a box fits together before you cut it. The Design Editor can also turn any design into an editable template, where you choose what people can change, like a name and its font, a symbol or the shape. One design can now have a laser cut and a 3D print version, and the community gallery shows how each design is made, with filters for laser cut, 3D print, UV print and customizable designs. Version 2.5 also rebuilds the Learning Center, adds the Depth Map Inspector and 292 free Kerf Designs from book nooks to automata, gives every community design a full page of its own and brings UV print styles and 107 race tracks to the Map Designer.
The Workbench is a code editor for designs with settings. Write the laser cut version in KerfScript and the 3D print version in OpenSCAD, or start from the name tag and box examples. Variables at the top of your code become a settings panel, the preview updates as you type, and you download SVG, STL or 3MF. Saved designs live in My Designs, and free accounts keep up to 10 private ones.
Select a part of your design and choose what people can change: their own text and font, show or hide it, its size, the line width, a different symbol, or one of several versions. Name each option, preview it as a customer and save it. Templates are free and listed in My Designs under Templates.
Designs written in the Workbench and editable templates carry a Customizable label in the community gallery. Their page shows the settings next to a live preview, so anyone can type a name, change the sizes and download the file, without an account. Every download counts for the maker, and Copy to Workbench gives other makers their own copy of the code to learn from.
A design can have a laser cut version and a 3D print version, saved and published together. The design page shows them under Ways to make it, and makers can add the missing one later with Add a 3D print version or Add a laser version on a design made in the Workbench.
Place each KerfScript part with at and rotate and the Workbench 3D preview shows the design put together. It warns you when two parts collide, which is how a finger joint facing the wrong way shows up, and parts without a place lie flat beside it. The Box with lid example shows how.
Map Designer layers can take a ready-made colour palette for UV printing, from Sea Glass and Porcelain to Neon city and Blueprint. Try each style on your map in the style gallery, then apply it. The features you picked and their line widths stay the same.
Category and occasion pages now show community designs after the tools, on the same cards. Christmas lists ornaments and gifts makers have shared, and Load more brings in the next set.
The KerfScript Playground and the Workbench now run KerfScript 0.8, which adds the kerf/cones and kerf/linkage libraries. Designs that place their parts get an Assembled view with arrows that build the model one step at a time, with dowels, screws and magnets in place and living hinges shown bent. The Playground adds a Format button, printable assembly instructions and back side files for designs that engrave both faces, and errors underline the exact spot in your code.
The Learning Center has a new home page, a sidebar with every guide by topic and search that opens with Ctrl K. Tell it which machine you have and the guides show your setup first. New pages cover troubleshooting, a glossary and short videos for each part of MyLaserTools, and tool pages open their guide in a side panel. Finishing a learning path earns 10 sparks, and every guide hides one more to find.
Kerf Designs brings 292 free laser designs you can customize: 51 book nooks, 67 miniatures, walking automata, marble machines, working models like an orrery and a Geneva drive, puzzle boxes, ornaments, desk organisers and shop signs. Set the material thickness and the sizes, watch the model go together in 3D and download the cut file. Book nooks and miniatures have their own Miniatures tab in the community gallery.
Every community design now opens on a page laid out like our tools: a banner with its picture, the settings or a Download panel next to the preview, then photos, details, how to make it, common questions, makes from the community and similar designs. Links to the old customize page bring you here.
Check a 16-bit depth map before it goes on the laser. The Depth Map Inspector reads PNG, PGM and PPM files in your browser, counts the grey levels that are really there and tells you why a map falls short, like 8-bit data saved as 16-bit or a shaded render instead of a height map. It shows how many depths your pass count can cut, a histogram and a 3D relief preview.
The 3D print side of the community gallery opens with more than 250 models you can customize before you print, from vases, planters and lanterns to bit holders, cable mounts, keychains and name blocks. Change the sizes and the text, then download STL or 3MF.
A Route layer can draw a race circuit instead of a GPX or KML file. Choose from 107 tracks, from road circuits in Europe and Japan to American ovals, search by name or place, filter by region and pick a layout such as Main circuit or Oval. The track cuts, engraves or prints like any other route.
Under You will also need, each pin, axle, bolt, nut, spacer or Chicago screw links to the matching 3D print generator with its sizes filled in. The 3D print side of the gallery also adds 34 hardware models you can customize, including threads, brackets, hangers, clamps, knobs, plugs and switch plates.
Version 2.4
Mixed-media layered maps, KerfScript, eight box generators, five maker generators and Blank Shapes
Map Designer now brings laser-cut sheets, UV-printed artwork and 3D-printed relief together in one layered map. Print lake depths on a backplate, cut a wood or acrylic shore plate, add printed terrain and check how the pieces fit before you make them. Introducing KerfScript too, our own programming language for laser cutting: write a design as code in the new KerfScript Playground, drag the sliders your code creates and download SVG or DXF. Five generators join them: name toppers for pens and pencils, keyboard switch clickers, 3D printed photo frames, sports bag tags and a whole sheet of snowflake gift tags from a list of names. Eight box generators arrive too: a chest of drawers, an organizer with dividers, star, round, slip lid, slide and door boxes and a stairs display, each cut from flat sheets or downloaded as print-ready pieces. The Design Editor also has a new Blank Shapes drawer with 114 tags, labels, bookmarks, badges and more, sized in millimetres and added to your design as cut lines. The Bookmark Generator and the Christmas ornament can also put grain, halftone, brush or paper textures behind your design, for engraving or print and cut.
Choose a process for each map layer: laser cut, score, engrave, UV print or 3D print. Combine them in one project, from a printed lake on a wooden backplate to a raised terrain piece above a cut shore plate.
KerfScript is a programming language made for laser cutting, and the new KerfScript Playground runs it right in your browser. Write a design as code or start from 24 examples, from a clock face and gift tags to a tilt maze and a slot-together sculpture. Comments in the code become sliders, kerf and finger joints are built in, and you download SVG or DXF with cut, score and engrave layers.
Type a name and print a topper that grips a pencil, pen, marker, stylus, straw or cord. By default the barrel runs along the name, or the name can stand on top with a socket, a through hole or a collar. Paste up to 100 names and get them all on one plate.
A clicky fidget built around a standard MX-style keyboard switch. Pick one of 12 shapes, put a symbol, a word, an SVG or a picture on the cap in a second colour, add a keychain loop and print the base and cap flat with no supports.
Pick the print you have, from Instax mini, square and wide to 4 x 6 in, 5 x 7 in, A6 and A5, and one of eight designs, including a song plaque. Add a few words as grooves or raised relief, then stand it on a base or feet, stick it to the fridge with magnets, hang it on the wall or from your keys.
Bag tags shaped like ten balls, from a basketball and a baseball to a hockey puck and a rugby ball, each with its own seams, stitches or panels. The name sits on a banner and the jersey number in a badge, in two layers you glue together or as one piece.
Christmas gift tags with a snowflake breaking out over the edge, engraved whole while the tag grows around it with a small margin. Paste up to 30 names for a whole sheet and choose from 85 snowflakes, 77 of them restored from Sekka Zusetsu, the 1832 Japanese book of snow crystals, so every tag can be different.
Open Shapes, then Blank Shapes, and browse 114 blanks by category or search for one. Pick a blank, type its width and height in millimetres and add it to your design as a cut line. Holes and ribbon slots are measured in millimetres too, so they keep their size when the blank gets bigger.
The Bookmark Generator and the Christmas ornament can lay a texture or pattern behind your design. Engraved, it becomes its own engrave layer and keeps a bare gap around your words so they stay readable. Printed, Download SVG gives one file with the print as an image, running a little past the cut line, and your text printed on top or left for the laser. On two and three layer ornaments the background sits on the backplate and shows through the frame's window.
A finger-jointed chest with one to six drawers. Each drawer is its own box, built a little smaller than its opening so it slides, with a round finger hole, a slot or a plain front. Cut it from one sheet, or print the chest and every drawer from the STL or 3MF.
An organizer box where every row gets its own number of compartments. The dividers lock into the walls and into each other, or lift out as one insert, and a slip-over lid closes the box.
A star box with 4 to 10 points. The wall bends around every tip and inner corner on living hinge cuts, its tabs lock into the base and the rim, and a lift-off lid sits on top.
A box with two doors or a single lid that turns on pins cut from the lid itself, so there are no hinges to buy. Ears on the free edge hold it shut and double as finger grips.
The Round Box Generator drops flat staves into a slotted base and rim, the Slip Lid Box Generator makes gift boxes with a lift-off lid and an optional handle, the Slide Box Generator builds a sliding lid box or a matchbox, and the Stairs Display Generator makes tiered risers for collections and shop displays.
Version 2.3
Make keychains, standees and ornaments from Art Library pieces, with 3D print versions
Every Art Library piece now has a Make it into menu that turns it into a keychain, a standee or an ornament. Monochrome pieces open the engraving tools and colour pieces open print and cut. Those tools can pick art without leaving the page, and each one has a 3D print version, with the engraving sunk into the face or the colours set flush in it. There is also a new Layered Wall Art Generator, and 39 new patterns for the box tools, including a set of optical illusions.
Next to Download and Open in Design Editor there is a Make it into menu with Keychain, Standee and Ornament. A monochrome SVG opens the engraving tools, and a colour piece or plate opens print and cut. The piece arrives in the tool already loaded.
The keychain, standee and ornament tools have a Browse the Art Library button that opens the library in a window. Choose a collection, search it and click a piece to use it. Paid pieces show their spark price before you take them.
Engrave SVG art or a photo on plywood and cut it out with a slotted base, or as two halves that slot together in a cross. Turn it around in 3D on wood before you cut.
Engrave a piece on a small wooden keychain cut around the artwork or to a circle, heart, arch or rectangle. The keyring hole slides along the top edge until it sits on solid wood.
Hang a piece on the tree. Choose a ball, bauble, drop, oval, ribbed ball, star, bell or tulip with a framed edge, or cut around the artwork itself, and the hanging loop is added at the top. One version prints and cuts, the other engraves.
Download a 3MF or an STL from any of these tools, right below the laser files. Engraved designs sink into the face with the groove floor as its own part. Colour SVGs sit flush in the face with one part per colour for a multi-colour printer.
Turn a pattern, a round mandala or an optical illusion into a stack of 2 to 8 laser-cut sheets. Every sheet further back has wider bars, so the glued-up panel looks carved. Turn or scale the lower sheets, mix in a second pattern and download one SVG per sheet.
The Box Generator and the 3D Box Generator have 39 new fill patterns, with a new Optical Illusions category: Vega Grid, Dot Sphere, Stripe Sphere, Wormhole and more. Pick one under Fill Pattern and turn the box in 3D to watch the faces bulge.
Version 2.2
Birdhouse, dollhouse and Christmas village generators, Art Library favourites and new books
Three new generators: a birdhouse sized to the bird you pick, a dollhouse in three scales and light-up Christmas village houses. Save Art Library pieces with a heart and find them on your Favourites page, see each month's new books lying open on their own page, and open any collection onto what's inside, from skeleton keys and weathervanes to watch wheels and jelly moulds. You can also connect Claude, ChatGPT or another AI assistant to your account over MCP, and earn Sparks by sharing designs and finished projects. New: turn photos and artwork into print-and-cut keychains.
Pick one of 15 birds and the floor, the box height and the entrance hole follow it. The gabled roof sits on tabs so it lifts off for cleaning, and vents, drain holes and climbing grooves are on by default.
Every piece in the Art Library has the same heart as the tool cards. Tap it to save the piece, tap it again to remove it. Any signed-in account can use it.
Every book that came into the library this month lies open on one page, eight of its first pieces across the spread and a count of how many came in. Open one to turn through the rest. Pieces that arrived on their own are gathered underneath as loose leaves.
Door hardware, ironwork and weathervanes, clocks and jewellery, the Victorian kitchen, toys and games, vintage tech, musical instruments, printers' cuts and penmanship. Every collection now opens onto a grid of what's inside it, keys or ferns or jelly moulds, and each of those has a page of its own.
Add MyLaserTools to Claude, ChatGPT, Claude Code, Cursor or any assistant that supports remote MCP servers, sign in and choose what it may do. Then ask for your project: it finds Art Library pieces, opens your picks in the design editor and fills in free generators such as Connected Text, Plant Stakes, Backpack Tags and 3D Print Boxes. With your permission it downloads the original files your account can open, and unlocks paid pieces with sparks once you agree to the cost.
Share a community design to earn 10 Sparks right away. Add a real photo of the finished piece for 10 more and useful making details for 5 more; a design featured in the gallery earns another 25. An approved ‘I made this’ post earns 10, and verified newsletter subscribers can claim 20. See your rewards, monthly community limit and achievements on the Earn Sparks page.
Turn a photo or artwork into a keychain with a preset shape, a transparent silhouette or background removal. Set the border, size and keyring hole, then download matching cut SVG and transparent print PNG, PDF and SVG files. The print uses your original artwork; background removal only determines its outline. Sign in to remove backgrounds.
Version 2.1
Layered art and 3D prints from the Art Library
Many Art Library pieces now have a Layers / 3D tab. Turn a piece into stacked laser layers, a cut inlay or a multi-colour 3D print, check it in 3D and download the files.
Choose how many colours to keep, remove small specks, and set the layer depth, frame and backing. A 3D view shows the result before you download. When you change a setting, press Update preview and the downloads follow.
2. Laser layers and inlays
Download every layer side by side in one SVG, ready to cut, with light glue guides showing where the next layer sits. Inlay files keep each colour as a filled shape so the cut pieces fit next to each other.
3. STL and 3MF for 3D printing
Export a flat multi-colour print or a stacked relief. The 3MF keeps each colour as its own part, so you can give each one a filament in your slicer.
Bend text into arcs and bulges from Text Effects. Number fields accept sums and units, so you can type 120/3 or 1/4in.
7. More vintage fonts
204 alphabets rebuilt from old lettering books are now available, up from 94, with redrawn hatched shadows.
8. Sign in with an email code
Get a one-time code by email instead of typing a password. If there is no account for that email yet, you can create one from the same screen.
Version 2.0
Art Library, sparks and a better Design Editor
MyLaserTools 2.0 introduces the Art Library, vintage fonts and the Pattern Generator, plus node editing and offsets in Design Editor. Sparks bring map exports and paid artwork together under one credit balance.
Browse more than 29,000 laser-ready pieces traced from illustrated books published before 1931, plus original designs. Search by collection, subject, mood, motif, book or tag. Each artwork page shows its source and explains how you may use it.
Many book illustrations are available as a monochrome SVG for engraving, a flat-colour SVG and a transparent PNG for printing. One unlock covers all available formats.
94 alphabets rebuilt from scanned lettering books, including 13 from Delamotte's Book of Ornamental Alphabets (1914). Type your own words to preview them.
Make repeating patterns in millimetres with separate cut, score and engrave layers. Open them in Design Editor or use them in supported panel and box tools.
One balance for map exports (10 sparks) and paid artwork (2 sparks). New accounts start with 100 sparks, and existing accounts get a one-time gift of 100.
Prepare laser-cut peg boards with adjustable hole sizes, edge clearance and optional engraved numbers. Clearer previews and corrected downloads make patterns easier to take from photo to finished piece.
Version 1.9
Gear clocks and car designs
Version 1.9 adds gear and clockwork generators, plus a set of car designs from badges to a novelty number plate. Map exports are faster, and the 3D map preview shows every cut layer as a solid sheet.
Cut layers look like solid wood with their holes kept. Switch between the assembled map and the layers laid out side by side.
Version 1.8
Box and enclosure generators
Ten generators for boxes, trays, shelves and cases. Each one lays out flat with finger joints, and you can spin the assembled model in 3D before you download the SVG or the STL and 3MF parts.
Triangle, square or hexagon board game tiles with twist-lock joints. Any tile locks onto any other of the same shape, and a whole set fits on one sheet.
Version 1.7
Star maps and the Design Editor
Eleven new free tools, many of them made for gifts, like a family tree sign and a star map of a real night sky. The Design Editor opened to everyone, so any tool's design can be finished in the browser.
A free vector editor in the browser. Draw, import any SVG, edit nodes and sort layers into cut, score and engrave. Every tool has an Open in Design Editor button.
Version 1.6
Map Designer
Map Designer launched with more than 30 presets, from figure-ground city plans to lake depth charts. Load a GPX file to draw your own route, or raise every building to its real height for a printable skyline. The Learning Center opened in the same release, and five text tools gained a batch mode.
Upload a GPX file from Strava, Garmin Connect or Komoot and your run, ride or hike becomes a bold line over a quiet street map. Colour it by speed to show your pace.
Paste a list of names into the Keychain Generator or Christmas Ornament and download the whole set in one go.
Version 1.5
Earring displays and favourites
New generators for earring holders and earring cards, a standing sign with a slotted stand, and curved text that follows a circle, spiral or wave. Tools and fonts can be saved as favourites, and the font library grew by more than 100 fonts.
Tap the heart on any tool card to find it again under Favourites. Star a font to pin it to the top of every font picker.
Version 1.4
Photo tools
Five ways to turn a photo into something you can engrave or print, from halftone dots to string art and backlit lithophanes. QR code plaques, hat patches and leather bookmarks came in the same release, and every preview started using one set of colours: red for cut, blue for engrave, teal for score.
A photo as a 3D-printable plaque. The lithophane shows the picture when lit from behind, and the relief raises bright areas off the base.
Version 1.3
3D printing generators
A run of generators for 3D printers: boxes and vases, plus metric bolts, washers, standoffs and Chicago screws. 3MF files started carrying colour, so a two-colour print arrives ready for the slicer. Designs could now be shared and saved, and the symbol library got much bigger.
An open-front diorama with finger-jointed walls, floating shelves and a name plaque, with brick or tile textures to engrave.
Version 1.2
Finger-jointed boxes
Generators for finger-jointed boxes, book nooks and joint panels that build oversized signs out of smaller sheets. Infinity mirror frames and a name puzzle for children came in the same release.
A crossword of your own words, laid out for laser cutting.
Version 0.7
STL export for 3D printing
Several tools started exporting STL files, so the same design could go to a 3D printer. New tools included a jigsaw puzzle with your text, plant stakes and a pumpkin name tag.
A big expansion: connected text, social media keychains, gift tags, earrings, alphabet keychains and the first Christmas and heart ornaments. Every tool learned inches as well as millimetres.