Retour: Accueil
MyLaserTools.com
Toutes les catégories

Enfants13 outils

Générateurs gratuits de SVG et de STL pour les activités créatives et les jouets des enfants. Créez des puzzles prénom, porte-clés alphabet, étiquettes de sac à dos, guides de lecture, mots croisés et outils pédagogiques.

Gratuit
Générateur d'étiquettes de sac de sport example
Découpe laserImpression 3DCNC

Générateur d'étiquettes de sac de sport

Étiquettes de sac gratuites en forme de balle, de ballon ou de palet pour dix sports : basket-ball, baseball, softball, football, football américain, volley-ball, hockey, tennis, golf et rugby, avec un prénom et un numéro de maillot.

Gratuit
Générateur de maisons de poupée example
Découpe laserImpression 3DCNC

Générateur de maisons de poupée

Maison de poupée gratuite à assemblages à queues droites aux échelles 1:12, 1:24 ou 1:48, avec des planchers à insérer, un grenier et un dos ouvert.

Gratuit
Générateur de puzzles prénom example
Découpe laserImpression 3DCNC

Générateur de puzzles prénom

Générateur gratuit de puzzles prénom personnalisés avec des lettres séparées pour les jouets d'apprentissage et les projets éducatifs des enfants

Gratuit
Générateur de porte-clés alphabet example
Découpe laserImpression 3DCNC

Générateur de porte-clés alphabet

Générateur gratuit de porte-clés à lettre unique pour la découpe laser et l'impression 3D

Gratuit
Générateur de porte-clés pour la découpe laser example
Découpe laserImpression 3DCNC

Générateur de porte-clés pour la découpe laser

Créateur gratuit de porte-clés et d'étiquettes de sac à dos avec votre texte personnalisé. Téléchargez un SVG pour la découpe laser ou un STL/3MF pour l'impression 3D.

Gratuit
Générateur d'étiquettes de sac à dos pour l'impression 3D example
Découpe laserImpression 3DCNC

Générateur d'étiquettes de sac à dos pour l'impression 3D

Créateur gratuit d'étiquettes de sac à dos et de porte-clés avec votre texte personnalisé. Téléchargez un SVG pour la découpe laser ou un STL/3MF pour l'impression 3D.

Gratuit
Générateur de guides de lecture example
Découpe laserCNC

Générateur de guides de lecture

Générateur gratuit de guides de lecture personnalisés avec règles pour la découpe laser. Idéal pour les élèves et les passionnés de lecture

Gratuit
Générateur de mots croisés example
Découpe laserCNC

Générateur de mots croisés

Générateur gratuit de grilles de mots croisés personnalisées à partir de mots, pour la découpe et la gravure laser

Gratuit
Étiquette prénom carotte example
Découpe laserCNC

Étiquette prénom carotte

Créez gratuitement une étiquette prénom en forme de carotte en SVG avec un texte personnalisé

Gratuit
Étiquette prénom citrouille example
Découpe laserCNC

Étiquette prénom citrouille

Créez gratuitement une étiquette prénom en forme de citrouille en SVG, idéale pour Halloween et les créations d'automne

Gratuit
Générateur de puzzles example
Découpe laserCNC

Générateur de puzzles

Générateur gratuit de puzzles personnalisés en SVG pour la découpe laser

Gratuit
Créateur de tuiles de jeu example
Découpe laserImpression 3DCNC

Créateur de tuiles de jeu

Créateur gratuit de tuiles de jeu emboîtables. Tuiles triangulaires, carrées et hexagonales à verrouillage par rotation avec assemblages réglables, exportées en SVG pour la découpe laser.

Gratuit
Créateur de moules à texte example
Impression 3D

Créateur de moules à texte

Créateur gratuit de moules imprimables en 3D pour tout prénom ou mot. Idéal pour le sable cinétique, l'argile, la pâte à modeler et la pâte à biscuits. Téléchargez un STL ou un 3MF.

Grandmother's Canopy Bed
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Grandmother's Canopy Bed

A miniature for book nooks and dioramas. Six selected-stock parts form an empty bed with integral tied curtains.

Table Corner Guards
PersonnalisablesGratuit
Impression 3D
par Hardware Designs

Table Corner Guards

Rounded covers for sharp table, desk, shelf and hearth corners, sized to the thickness of the top. Use double-sided tape, or turn on the lip that hooks under the edge. Prints upside down with no supports. TPU gives a softer bump.

Forty-Layer Bed
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Forty-Layer Bed

A miniature for book nooks and dioramas. Twenty mattresses, twenty eiderdowns and a pea under the bottom layer. Assemble boards around deck and rails, then key the frame into its base. Seat bearers and reveal, glue two 2.5 mm pins into the foundation only, and slide the 39 bored bedding plates down them. Fit the assembled ladder into its base, then close both ladder heads with the last 1.5 mm quilt.

Spindle Bench
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Spindle Bench

A miniature for book nooks and dioramas. A parked hardwood spindle threads through the bench's cheeks and whorl. Glue the shaft into both cheeks and all three whorl courses.

Glass Slipper Step
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Glass Slipper Step

A miniature for book nooks and dioramas. A sourced court-shoe profile in 3 mm clear acrylic, on three layered stones.

Straw and Gold Spinning Wheel
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Straw and Gold Spinning Wheel

A miniature for book nooks and dioramas. A laminated wheel on a separate dowel axle, with a spindle and treadle.

Tortoise Finish Line
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Tortoise Finish Line

A miniature for book nooks and dioramas. Glue the 2 mm pin inside the lower button, with its end recessed. Trap the button below the slotted cover and glue the glide plate onto the pin. Key the tortoise into the two slots in the glide plate.

Dragon on its Hoard
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Dragon on its Hoard

A miniature for book nooks and dioramas. A coiled dragon watches a pile of coins. Glue the relief on both faces of its body. The body and two separate wing panels key into the coin bed.

Rocking Chair
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Rocking Chair

A miniature for book nooks and dioramas. Rocking chair: a miniature rocking chair that really rocks, for dioramas, book nooks, a dollhouse nursery and a reading corner. Two sides stand on their curved rockers; the seat and two back slats are tabbed between them. It has no base: it rocks on the table. Assembly: slide the seat and the back slats into one side, then press the other side on. Glue the cushion on the seat.

Go for Launch Mission Control Book Nook
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Go for Launch Mission Control Book Nook

Space centre book nook: "Go for Launch". Mission control, in the last minute of a countdown. The big screen fills the back wall: the rocket on its pad by the tower, the clock running down, the trajectory arcing to orbit. Two consoles face it with their chairs, and the flight director's console stands up on its tier behind them. The GO / NO GO board is all green but one; the clocks show four cities; the mission patch is on the wall. On the tier, beside a forgotten coffee, a family photo is taped up with a child's drawing of the rocket. A finger-jointed shell behind the control room's lit panels

The Round Table Book Nook
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

The Round Table Book Nook

A compressed view of Arthur's hall and the churchyard memory beyond its side arch. The sword lifts out of the marble and steel anvil.

Pirate Chest
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Pirate Chest

Pirate chest: a finger-jointed chest with a barrel lid of narrow staves laid over two arched ends, hand holds in the ends and a lock plate with an engraved keyhole. Each lid end is two layers glued together, so every stave has a broad edge to glue to, and the lid hangs on two leather straps glued across the back, the way old sea chests were hinged. Assembly: glue the chest, and glue each pair of lid ends together. Stand the lid ends on the chest's ends and glue the staves on one at a time from the back, keeping the gaps even. Glue two leather straps, 20 mm wide, from the back wall up over the

Microscope Model
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Microscope Model

Microscope: a model of an old brass-and-wood microscope that focuses. Turning either knob turns a pinion between the two walnut limb plates, which drives a rack on the slider, and the slider carries the tube up and down. Two blocks fixed between the plates run in windows in the slider: they keep it against the pinion and stop it at each end of its travel. The tube is a strip bent round by a living hinge on two discs, with a gap at the back where the slider enters it. A stage with clips sits on the limb, and under it a mirror tilts on its tabs. Assembly: glue the slider's two layers together, a

Lock Diary
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Lock Diary

Lock diary: a wooden diary that locks with a key. The covers and spine are one piece with a living hinge, and a walnut strap glued to the back cover wraps round the fore edge, its own living hinge bending it, and slides into a lock on the front. Turning the key a half turn swings an eccentric cam inside the lock, which drives a bolt sideways into a notch in the strap's tongue. Pulling the strap only presses the bolt against the side of its slot, so it holds, and a cam at either end of its turn cannot be pushed back. Inside, four corner posts with caps hold a notepad or the back cover of a soft

Kamishibai Story Theatre
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Kamishibai Story Theatre

Kamishibai: a paper theatre for telling picture stories. The story cards stand in a finger-jointed frame and slide out through a slot in the side, one picture at a time, while you read the words printed on the back of the card in front through the back window. Two side doors and a top door open like curtains for the show. Use 6 mm plywood or thicker so the hinge screws have wood to bite. Assembly: glue the frame. Hinge each side door on the front edge of its side and the top door on the top front edge with small brass hinges, using screws no longer than the plywood is thick.

Hex Marble Board
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Hex Marble Board

Hex marble board: a hexagonal board of hollows for marble games, with a raised rim and a tray at each end for the marbles you capture. Each hollow is a hole a little smaller than the marble, over a solid base, so the marbles sit steady but roll out with a push. Choose how many hollows along each side and the marble size; the board follows. Assembly: glue the hollow plate onto the base and the rim on top, lining up the outlines.

Frame Loom
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Frame Loom

Frame loom: a tapestry loom that stands on the table. Notched rails glued across the stiles hold the warp at an even spacing, and two feet slot onto the stiles to stand it upright as you work. It comes with a stick shuttle and a comb for beating the weft down. Assembly: glue the rails across the stiles, square, and slot the feet on. Wind the warp over the notches, top and bottom, at an even tension.

Four in a Row
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Four in a Row

Four in a row: drop your tokens into the columns and be first to line up four, across, up or diagonally. The board is two face plates held apart by the column separators, whose tabs pass through both plates and are glued, so the board stays square and flat. It slides into the two stands, and pulling the release bar out at the bottom lets all the tokens fall out to start again. One player's tokens are walnut, the other's plywood. Assembly: glue the separators' tabs into one face plate, lay the release bar along the bottom without glue, and glue the other plate on, checking the bar still slides.

Easter Basket
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Easter Basket

Easter basket: a finger-jointed basket with a woven look, a handle that arches over the top and a bunny or a chick peeping up from the front wall, with a name engraved below it. The handle's legs stand inside the side walls and lock into them with tabs, so lifting by the handle pulls on the whole box, not just the glue. Assembly: fit the walls round the base and glue. Slide the handle down between the side walls until its tabs click into their slots.

Cupcake Tree
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Cupcake Tree

Cupcake tree: a party stand of two tree-shaped plates slotted across each other, their branches curving up to round platforms for cupcakes. Each level's two branches belong to one plate and the next level's to the other, so the platforms climb round the trunk in a spiral, every cupcake clear of the platform above it. A branch ends in a flat pad with a tab that locates its platform; a bigger platform crowns the trunk, and the plates stand in a round base. It packs flat. Assembly: slide the plates together at the trunk, the one with the slot from the top over the one with the slot from the botto

Crankie Story Box
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Crankie Story Box

Crankie: a moving panorama, the old storyteller's box. A long paper scroll winds from one upright spool to the other past a window, turned by the cranks on top. The window's lower edge is a skyline of hills and pines, so the foreground stays still while the scene scrolls behind it, and an open back lets a lamp shine through the paper. The spools are sized from the scroll's length and thickness. Assembly: glue the box together on the plinth, leaving the top loose. Tape the scroll's ends to the dowels, wind it on, drop the dowels through the bottom holes, then fit the top and glue a crank on eac

Desk Catapult
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Desk Catapult

Catapult: a desk mangonel. A three-layer laminated arm turns on a dowel axle between two braced uprights, sprung by rubber bands from a notch on its short end to an anchor dowel behind. Pull the arm back and push the trigger peg across over it; pull the peg out sideways to throw. The arm hits the padded stop bar and the ball flies on. The peg stays in the right upright when pulled, so it cannot get lost. Assembly: glue the three arm layers into one, with the tabbed layer in the middle, and glue the cup and its ring onto the tabs. Push the uprights' tabs into the base, fit the stop bar and the

Birdhouse
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Birdhouse

Birdhouse: a nest box with a pitched roof, an entrance hole sized for the bird you want, drain holes in the floor and vent slots under the eaves. One roof panel runs past the ridge to cover the other's edge, and tabs on the gables lock into slots in both roof panels. The right side is a clean-out door: it swings out on two nails at the top and is held shut by a third at the bottom, so the box can be emptied after each season. Assembly: glue the left side, the floor and the front and back together, then glue the roof panels down onto the gable tabs. Fit the door between the front and back and d

Actualités par e-mail

Suivez les nouveautés de MyLaserTools.

Envoyez-moi des e-mails sur les nouveaux outils, les mises à jour, les tutoriels et les offres occasionnelles de MyLaserTools. Désinscription possible à tout moment.

MyLaserTools
par YXE Creations Craft Hub
Des centaines de créateurs à travers le monde nous font confiance
Identifiez-nous sur Instagram
Partagez vos réalisations avec @mylasertools
Rejoignez notre groupe Facebook
Partagez vos créations, posez vos questions et trouvez l'inspiration
YXE Creations Craft Hub Inc

© 2026 MyLaserTools.com. Tous droits réservés.