Retour: Communauté
MyLaserTools.com

Celestial geared orrery

Celestial: a hand-cranked geared orrery. The crank turns three drive gears pinned together on one axle; each meshes with an orbit gear on a fixed journal…

par Kerf Designs

Réglages

Unités

Mechanism

Gear module
Tooth size: pitch diameter = teeth x module. Also sets the axle spacing and the orbits
Backlash
Total play between two meshing gears, at the pitch circle
Marker size
Diameter of the planets

Fit

Bearing clearance
Added to the 8 mm holes the gears and crank turn on

Assembly

Crank angle
round once

Export

Output
All parts, or one group at a time

Material

Épaisseur du matériau
Sheet thickness
mm
Largeur de coupe
Beam width
mm

Aperçu 3D

Génération de votre modèle
Palette d'inspiration

Code

Copier dans l'atelier

Photos

Celestial geared orrery

À propos de cette création

Découpe laser et Impression 3D

Celestial: a hand-cranked geared orrery. The crank turns three drive gears pinned together on one axle; each meshes with an orbit gear on a fixed journal beside it, so the three planets circle a fixed sun at half, once and twice the crank speed, the other way. Stylized speeds, not astronomical.

Décoration intérieureMaquettes
mechanismskinetic

Usage personnelUsage commercial

Qu'est-ce que cela signifie ?

Comment la fabriquer

  1. 1Modifiez les réglages. L'aperçu se met à jour après chaque modification.
  2. 2Téléchargez le SVG pour votre laser, ou ouvrez-le dans l'éditeur de créations pour le compléter.
  3. 3Aimez la création et ajoutez ci-dessous une photo de votre réalisation.

Questions

Oui. Vous pouvez la télécharger et l'utiliser gratuitement selon sa licence.

Oui. Modifiez les réglages sur cette page : l'aperçu se met à jour au fur et à mesure. Quand le résultat vous convient, téléchargez le fichier.

Un SVG pour votre logiciel laser. Vous pouvez aussi l'ouvrir dans l'éditeur de créations, ou télécharger des fichiers STL et 3MF à l'épaisseur du matériau pour imprimer les pièces.

La taille suit les réglages de cette page, et l'encadré de taille sous l'aperçu affiche le résultat.

Réglez l'épaisseur du matériau sur celle de la plaque que vous découpez. Les fentes et les tenons s'y adaptent.

Oui. La licence couvre l'usage personnel et commercial des objets que vous fabriquez.

Réalisé par la communauté

Vous avez découpé cette création ? Partagez une photo et une note sur votre expérience pour recevoir immédiatement 10 étincelles.

Je l'ai réalisé

Plus de créations de Kerf Designs

Locker Stall
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Locker Stall

A miniature for book nooks and dioramas. Locker stall: a miniature team locker with the player's jersey, for dioramas, shelves and a gift to any player. Two sides hold the back, a kick panel, a bench seat, a helmet shelf and a name board, all tabbed in; the jersey (team colours, name, number) hangs by a hole in its hanger on a peg tabbed into the back. Skates or cleats can stand on the seat, the helmet on the shelf. Hockey, soccer, basketball or baseball. Assembly: push the back, the kick panel, the seat, the shelf and the name board into one side, add the other, push the peg into the back, ha

Vampire Coffin
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Vampire Coffin

A miniature for book nooks and dioramas. Coffin: a miniature vampire's coffin for dioramas, Halloween and book nooks. A true coffin shape from every side: a stack of coffin-shaped rings on a solid floor, aligned by two keys that stand in the floor's slots and slide through notches in every ring; no corner joints to show. The lid is two layers, closed or slid half open on the velvet and the rose inside. It can stand on a stone plinth. Assembly: stand the keys in the floor, thread the rings down over them, glue each, lay the lid on; set it all on the plinth.

Library Bookcase
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Library Bookcase

A miniature for book nooks and dioramas. Library bookcase: a miniature bookcase with its rolling-style ladder, for dioramas, dollhouses and book nooks. The bookcase is a tab-and-slot box of sides, a back, shelves and a top, with rows of books standing in slots on every shelf and, with the ladder, a brass rail tabbed across the front. The ladder's two rails lean back to that rail and hook over it through notches in their tops; its treads tab into the rails and its feet stand in the base. One book on the top shelf has a ribbon bookmark with an initial on it. Assembly: build the bookcase and stan

Bread Rack
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Bread Rack

A miniature for book nooks and dioramas. Bread rack: a miniature bakery rack for dioramas, shop fronts and book nooks. Two ladder ends (legs, a band at every shelf, cut-outs between) hold slatted shelves tabbed into them, and the bread stands in slots on the shelves: round loaves, croissants, and baguettes in a basket on top. Assembly: push the shelves into one ladder end, add the other, stand the bread in its slots, set the feet in the base.

Créations similaires

Game Day Locker Room Book Nook
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Game Day Locker Room Book Nook

Locker room book nook: "Game Day". An hour before the game. The player's jersey hangs in the middle stall with their name and number, the skates wait on the bench, the sticks in the rack, the helmet on the shelf. On the whiteboard the line-up, the player's number circled and a C beside it: made captain today. Hockey by default; soccer, basketball or baseball with one switch (the gear, the floor mark and the view of the arena change with it). A finger-jointed shell in the team's colours, the scoreboard over the door, holds real miniature furniture in detail ply: three locker stalls (sides, back

Table Corner Guards
PersonnalisablesGratuit
Impression 3D
par Hardware Designs

Table Corner Guards

Rounded covers for sharp table, desk, shelf and hearth corners, sized to the thickness of the top. Use double-sided tape, or turn on the lip that hooks under the edge. Prints upside down with no supports. TPU gives a softer bump.

Grandma's Pantry Book Nook
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Grandma's Pantry Book Nook

Pantry book nook: "Put Up for Winter". A cellar pantry in autumn, the shelves full to the ceiling with jars: pickles, beetroot, honey, every one labelled by hand. Garlic and onions hang in braids, the pickle crock waits under its lid, potatoes spill from the sack, and the cat has seen a mouse. Cobblestones show through the little street-level window. At the back of the middle shelf one big jar says DO NOT OPEN UNTIL 2030. A finger-jointed shell of whitewashed stone holds real miniature furniture in detail ply: the tall shelving (an open tab-and-slot case, rows of jars standing in slots on ever

Furniture Feet and Leg Caps
PersonnalisablesGratuit
Impression 3D
par Hardware Designs

Furniture Feet and Leg Caps

Screw-on cone feet for boxes, cabinets and appliances, and caps that slip over round or square chair and table legs. Add a shallow recess on the bottom for a felt pad. Prints floor side down with no supports. TPU grips the floor; PETG slides.