Retour: Communauté
MyLaserTools.com

Coat Stand

A miniature for book nooks and dioramas. Coat stand: a miniature hall tree for dioramas, dollhouses and book nooks. Two profiles cross-lap at the middle into…

par Kerf Designs

Réglages

Unités

Stand

Stand height
Height, real cm
cm
Foot span
Foot span, real cm
cm
Coat
Trench coat and hat on the hooks
Base
A round base plate to stand it on
Scale to
Scale, 1 : this (12 dollhouse, 20 book nook, 24 small)
Finish
How the details are cut: engraved, shaded in three engrave depths, or left plain

Material

Épaisseur du matériau
Sheet thickness in millimetres
mm
Largeur de coupe
Laser kerf in millimetres
mm
Clearance
Extra gap in the joints, in millimetres
mm

Aperçu 3D

Génération de votre modèle
Palette d'inspiration

Code

Copier dans l'atelier

Photos

Coat Stand

À propos de cette création

Découpe laser et Impression 3D

A miniature for book nooks and dioramas. Coat stand: a miniature hall tree for dioramas, dollhouses and book nooks. Two profiles cross-lap at the middle into a post with four hooks and a cross foot; the front profile can carry a trench coat and a hat, cut in one piece with the post. An optional round base takes the feet in slots so it stands on its own. Assembly: slide the two profiles together at their halving slots, set the feet in the base and glue.

Miniatures
miniaturesdioramasfurniture

Usage personnelUsage commercial

Qu'est-ce que cela signifie ?

Comment la fabriquer

  1. 1Modifiez les réglages. L'aperçu se met à jour après chaque modification.
  2. 2Téléchargez le SVG pour votre laser, ou ouvrez-le dans l'éditeur de créations pour le compléter.
  3. 3Aimez la création et ajoutez ci-dessous une photo de votre réalisation.

Questions

Oui. Vous pouvez la télécharger et l'utiliser gratuitement selon sa licence.

Oui. Modifiez les réglages sur cette page : l'aperçu se met à jour au fur et à mesure. Quand le résultat vous convient, téléchargez le fichier.

Un SVG pour votre logiciel laser. Vous pouvez aussi l'ouvrir dans l'éditeur de créations, ou télécharger des fichiers STL et 3MF à l'épaisseur du matériau pour imprimer les pièces.

La taille suit les réglages de cette page, et l'encadré de taille sous l'aperçu affiche le résultat.

Réglez l'épaisseur du matériau sur celle de la plaque que vous découpez. Les fentes et les tenons s'y adaptent.

Oui. La licence couvre l'usage personnel et commercial des objets que vous fabriquez.

Réalisé par la communauté

Vous avez découpé cette création ? Partagez une photo et une note sur votre expérience pour recevoir immédiatement 10 étincelles.

Je l'ai réalisé

Plus de créations de Kerf Designs

Locker Stall
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Locker Stall

A miniature for book nooks and dioramas. Locker stall: a miniature team locker with the player's jersey, for dioramas, shelves and a gift to any player. Two sides hold the back, a kick panel, a bench seat, a helmet shelf and a name board, all tabbed in; the jersey (team colours, name, number) hangs by a hole in its hanger on a peg tabbed into the back. Skates or cleats can stand on the seat, the helmet on the shelf. Hockey, soccer, basketball or baseball. Assembly: push the back, the kick panel, the seat, the shelf and the name board into one side, add the other, push the peg into the back, ha

Vampire Coffin
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Vampire Coffin

A miniature for book nooks and dioramas. Coffin: a miniature vampire's coffin for dioramas, Halloween and book nooks. A true coffin shape from every side: a stack of coffin-shaped rings on a solid floor, aligned by two keys that stand in the floor's slots and slide through notches in every ring; no corner joints to show. The lid is two layers, closed or slid half open on the velvet and the rose inside. It can stand on a stone plinth. Assembly: stand the keys in the floor, thread the rings down over them, glue each, lay the lid on; set it all on the plinth.

Library Bookcase
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Library Bookcase

A miniature for book nooks and dioramas. Library bookcase: a miniature bookcase with its rolling-style ladder, for dioramas, dollhouses and book nooks. The bookcase is a tab-and-slot box of sides, a back, shelves and a top, with rows of books standing in slots on every shelf and, with the ladder, a brass rail tabbed across the front. The ladder's two rails lean back to that rail and hook over it through notches in their tops; its treads tab into the rails and its feet stand in the base. One book on the top shelf has a ribbon bookmark with an initial on it. Assembly: build the bookcase and stan

Bread Rack
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Bread Rack

A miniature for book nooks and dioramas. Bread rack: a miniature bakery rack for dioramas, shop fronts and book nooks. Two ladder ends (legs, a band at every shelf, cut-outs between) hold slatted shelves tabbed into them, and the bread stands in slots on the shelves: round loaves, croissants, and baguettes in a basket on top. Assembly: push the shelves into one ladder end, add the other, stand the bread in its slots, set the feet in the base.

Créations similaires

Pantry Shelf
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Pantry Shelf

A miniature for book nooks and dioramas. Pantry shelf: a miniature shelving case full of preserves, for dioramas, dollhouse kitchens and book nooks. An open tab-and-slot case whose shelves carry rows of jars standing in slots: pickles, beetroot and honey, each with a hand-written label and a cloth over its lid; on the middle shelf one big jar says DO NOT OPEN UNTIL (a year you choose). Assembly: push the shelves and the back into one side, add the other, press the top on, stand the jars in their slots.

3D Printer
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

3D Printer

A miniature for book nooks and dioramas. 3D printer: a miniature open-frame 3D printer for dioramas, book nooks and a maker's shelf, mid-print. Two rails stand on the base with the bed tabbed onto them; the gantry frame (two uprights, the top bar, the X axis, the spool on top) straddles the rails; the print head is glued on the frame's front, the screen panel stands at the front showing the progress, and the print stands in slots in the bed: a dragon, a vase or a benchy. Assembly: set the rails in the base, press the bed onto their tabs, stand the print in the bed, set the frame and the screen

Control Console
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Control Console

A miniature for book nooks and dioramas. Control console: a miniature starship console for dioramas, sci-fi scenes and book nooks. Two shaped sides hold a sloping control deck in sloping slots and an upright screen bulkhead behind it; a front, a back and a top tab in and close the box. The deck is engraved with switches, sliders, a lit display and the big red button under its guard, with a sticky note beside it; the screens show a wave and a radar sweep. Assembly: push the deck, the screens, the front and the back into one side, add the other, press the top onto the sides' tabs.

Cat Tree
PersonnalisablesGratuit
Découpe laserImpression 3D
par Kerf Designs

Cat Tree

A miniature for book nooks and dioramas. Cat tree: a miniature cat tree with its cats, for dioramas, dollhouses and every cat person's shelf. Two cross-lapped posts wrapped in sisal: the tall one carries a platform that slides down over its narrow top and rests on the step where the post widens, and a perch on its top; the short one a carpeted den with a round doorway (and eyes in the dark inside). Cats stand in slots on the platform, the perch and the den. Assembly: slide each pair of posts together, stand them in the base, drop the platform onto its step, press the perch on, build the den on