# Make a postage stamp gift tag

> Make postage stamp gift tags with perforated edges, postal lettering and an optional ribbon hole.

The outline has inward semicircular notches separated by straight sections, like the perforated edges of a postage stamp. The corners stay solid. The optional hole sits above the frame with space around it for the ribbon.

## What you need

- Plywood or acrylic for laser cutting, or filament for printing
- Ribbon or twine if you add a hole

## Choose the stamp and lettering



Choose a stamp shape and frame. Set the width, height and perforation spacing.

Choose a postal heading preset or enter your own. Edit the postage value, recipient and message, then choose a font.

Set the postmark wording, date and place. Add a ribbon hole if you want to hang the tag.

![Maple plywood postage stamp tag with North Pole Post lettering, 25 cents and a circular postmark](https://www.mylasertools.com/learn/tools/postmark-gift-tag-generator-laser.webp)

Default design in 3 mm maple plywood.

## Laser cutting

### Engrave and cut



Engrave the postal details before cutting the outline and hole. Match the ribbon to your chosen hole diameter.

## 3D printing

### Print the tag



Print flat with the lettering facing up. Use STL for one solid body or 3MF for separate base and lettering colours. Check thin letter strokes in the slicer.

![Default design with raised postal details in two colours.](https://www.mylasertools.com/learn/tools/postmark-gift-tag-generator-print.webp)

Default design with raised postal details in two colours.

## Make it yours

This version makes frames and postal lettering. The centre can stay blank or hold your recipient and gift message.

## Common questions

### Can I make a stamp without a hole?

Yes. Turn off Add a hole. The frame and lettering use the extra space at the top.

---

Open the generator: https://www.mylasertools.com/postmark-gift-tag-generator
Read online: https://www.mylasertools.com/learn/guides/postmark-gift-tag-generator
