# Making a personalized gift card holder with the Gift Card Holder Generator

> A gift card that looks like a present: a pocket for the card behind a window, with the name on a ribbon

The holder is drawn around the card, so a standard 85.6 by 54 mm gift card fits snugly, and the spacer is open at the top so the card goes in after the glue has dried.

Every name you type becomes its own holder in the same file, and the small art pieces are packed into the free space of the plates so a whole class set fits on a few sheets.

## What you need

- 3 mm plywood for the plates, plus offcuts in two or three colours for the art
- Wood glue or PVA
- A gift card, and ribbon for the hanging tab

## 1. Pick a design and type the names



Choose a **Design**: **Christmas tree**, **Wrapped present**, **Gingerbread house**, **Birthday cake** or **Classic frame**. The classic frame takes any **Symbol** from the library, so it works for teachers, birthdays or a thank you.

Type the names under **One name per line**, up to 20. Pick a **Font** and a **Name height**; a long name shrinks to fit its ribbon or sign and the panel says so.

## 2. Set up the holder



- **Layered** cuts the art as separate pieces to glue on in different colours. **Flat** puts everything on one front, scored and engraved, with no small parts to glue.
- Leave **Card** on the standard gift card, or choose **Custom size** and enter the card's width and height.
- Set **Sheet thickness** to your plywood: it sizes the stand's slot and the 3D preview.
- Turn on **Gluing guide** to score light lines where each art piece goes.
- Under **Hang or stand**, pick a **Hanging tab** for the tree, a **Stand** with a slotted base, or **None**.

## Laser cutting

### Cut and glue



1. Download the **SVG**. Run the engrave and score layers first, then cut the red layer.
2. Cut the art pieces from coloured offcuts, or paint them before gluing.
3. Glue the spacer onto the back, edges lined up, then the front onto the spacer. Keep glue away from the pocket.
4. Glue the art onto the front, lowest layer first. With the gluing guide on, each piece has its outline to sit on.
5. Slide the card in from the top once the glue is dry.

## 3D printing

### Print settings



- Download the **3MF** to print every layer in its own colour, or the **STL** for one piece.
- Print it lying on its back. The front bridges over the card pocket, so use your slicer's bridge settings.

## Make it yours

- Paste a whole class list for teacher gifts at the end of term.
- Use the birthday cake with a cinema or café card inside.
- Hang it on the tree on Christmas Eve, with the card waiting behind the window.

---

Open the Gift Card Holder Generator: https://www.mylasertools.com/gift-card-holder-generator
Read online: https://www.mylasertools.com/learn/guides/gift-card-holder-generator
