# Make a family bell stack ornament

> a hanging stack of bells, one for each name

The example shows the default three-bell design in ruby-red acrylic. Emma’s bell has a bow, and a gold cord passes through the ring at its upper edge.

## What you need

- A laser cutter and a sheet of red cast acrylic compatible with your machine, or a 3D printer and filament
- Cord that fits through the hanging ring

## Arrange the names and ribbons



Enter one name per line in hanging order, starting at the top. Select a font and turn on a ribbon beside each name that needs one. Check the longest name in Preview, since the lettering shrinks to fit its bell.

![Three overlapping red acrylic bells engraved with Emma, Noah and Olivia. A gold cord passes through the ring beside Emma’s bow.](https://www.mylasertools.com/learn/tools/bell-stack-ornament-laser.webp)

In this render, the engraved names look frosted. The fine scored lines trace the bow, stars and rims.

## Size the stack



Adjust bell width and overlap, then check the overall dimensions against your sheet or print bed. Set the ring’s inner diameter to fit your cord.

## Laser cutting

### Assign the three operations



Download the SVG at its original size. In Laser Preview, blue marks the names to engrave, teal marks the details to score, and red marks the cuts. Test the engraving and scoring on a scrap of the same acrylic. On the ornament, engrave and score first, cut the ring opening, then cut the outer edge. Thread your cord through the ring.

## 3D printing

### Print with the names facing up



Set the extrusion depth for the base. The names, bows and bell lines rise another 0.6 mm. Download STL for a single solid or 3MF to keep the base and details as separate color parts. Place the flat back on the print bed and check the lettering and ring opening in the sliced preview.

![Three printed bells with a raised bow and contrasting names.](https://www.mylasertools.com/learn/tools/bell-stack-ornament-print.webp)

The default print has a 3 mm base and 0.6 mm raised details.

---

Open the ornament generator: https://www.mylasertools.com/bell-stack-ornament
Read online: https://www.mylasertools.com/learn/guides/bell-stack-ornament
