Volver: Comunidad
MyLaserTools.com

Dress Form

A miniature for book nooks and dioramas. Dress form: a miniature dressmaker's form for dioramas, book nooks and a sewist's shelf, wearing a dress pinned but…

por Kerf Designs

Configuración

Dress form

Form height
Height, real cm
Machine
The sewing machine on the base beside it
Base
A base plate
Scale to
Scale, 1 : this (6 big desk model, 12 dollhouse, 20 book nook)
Finish
How the details are cut: engraved, shaded in three engrave depths, or left plain

Material

Grosor del material
Sheet thickness in millimetres
Kerf
Laser kerf in millimetres
Clearance
Extra gap in the joints, in millimetres

Vista previa 3D

Creando tu modelo
Paleta inspiracional

Código

Copiar al Banco de trabajo

Fotos

Dress Form

Sobre este diseño

Corte láser e Impresión 3D

A miniature for book nooks and dioramas. Dress form: a miniature dressmaker's form for dioramas, book nooks and a sewist's shelf, wearing a dress pinned but not hemmed. A pole plate from its feet to the neck with a stop at the hips; side plates tabbed through it in front and behind make a cross in the torso and at the feet; the torso is a stack of rings, each its own size, slid down over the cross onto the stop, so the form has hips, a waist and a bust; the skirt is glued on the pole below. A sewing machine can stand beside it. Assembly: push the side plates' tabs through the pole, torso and f

Miniaturas
miniaturesdioramasfurniture

Uso personalUso comercial

¿Qué significa esto?

Cómo hacerlo

  1. 1Cambia los ajustes. La vista previa se actualiza tras cada cambio.
  2. 2Descarga el SVG para tu láser o ábrelo en el Editor de diseños para añadirle más cosas.
  3. 3Dale me gusta al diseño y añade abajo una foto de lo que hiciste.

Preguntas

Sí. Puedes descargarlo y usarlo gratis según su licencia.

Sí. Cambia los ajustes en esta página y la vista previa se actualiza al momento. Cuando te guste, descarga el archivo.

Un SVG para tu software láser. También puedes abrirlo en el Editor de diseños o descargar STL y 3MF con el grosor del material para imprimir las piezas.

El tamaño depende de los ajustes de esta página, y el recuadro de tamaño bajo la vista previa muestra el resultado.

Ajusta el grosor del material a la plancha que cortas. Las ranuras y pestañas se adaptan a él.

Sí. La licencia cubre el uso personal y comercial de las piezas que hagas.

Hecho por la comunidad

¿Lo cortaste? Comparte una foto y una nota sobre cómo salió y recibe 10 chispas al instante.

Lo hice

Más de Kerf Designs

Locker Stall
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Locker Stall

A miniature for book nooks and dioramas. Locker stall: a miniature team locker with the player's jersey, for dioramas, shelves and a gift to any player. Two sides hold the back, a kick panel, a bench seat, a helmet shelf and a name board, all tabbed in; the jersey (team colours, name, number) hangs by a hole in its hanger on a peg tabbed into the back. Skates or cleats can stand on the seat, the helmet on the shelf. Hockey, soccer, basketball or baseball. Assembly: push the back, the kick panel, the seat, the shelf and the name board into one side, add the other, push the peg into the back, ha

Vampire Coffin
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Vampire Coffin

A miniature for book nooks and dioramas. Coffin: a miniature vampire's coffin for dioramas, Halloween and book nooks. A true coffin shape from every side: a stack of coffin-shaped rings on a solid floor, aligned by two keys that stand in the floor's slots and slide through notches in every ring; no corner joints to show. The lid is two layers, closed or slid half open on the velvet and the rose inside. It can stand on a stone plinth. Assembly: stand the keys in the floor, thread the rings down over them, glue each, lay the lid on; set it all on the plinth.

Library Bookcase
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Library Bookcase

A miniature for book nooks and dioramas. Library bookcase: a miniature bookcase with its rolling-style ladder, for dioramas, dollhouses and book nooks. The bookcase is a tab-and-slot box of sides, a back, shelves and a top, with rows of books standing in slots on every shelf and, with the ladder, a brass rail tabbed across the front. The ladder's two rails lean back to that rail and hook over it through notches in their tops; its treads tab into the rails and its feet stand in the base. One book on the top shelf has a ribbon bookmark with an initial on it. Assembly: build the bookcase and stan

Bread Rack
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Bread Rack

A miniature for book nooks and dioramas. Bread rack: a miniature bakery rack for dioramas, shop fronts and book nooks. Two ladder ends (legs, a band at every shelf, cut-outs between) hold slatted shelves tabbed into them, and the bread stands in slots on the shelves: round loaves, croissants, and baguettes in a basket on top. Assembly: push the shelves into one ladder end, add the other, stand the bread in its slots, set the feet in the base.

Diseños parecidos

Pantry Shelf
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Pantry Shelf

A miniature for book nooks and dioramas. Pantry shelf: a miniature shelving case full of preserves, for dioramas, dollhouse kitchens and book nooks. An open tab-and-slot case whose shelves carry rows of jars standing in slots: pickles, beetroot and honey, each with a hand-written label and a cloth over its lid; on the middle shelf one big jar says DO NOT OPEN UNTIL (a year you choose). Assembly: push the shelves and the back into one side, add the other, press the top on, stand the jars in their slots.

3D Printer
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

3D Printer

A miniature for book nooks and dioramas. 3D printer: a miniature open-frame 3D printer for dioramas, book nooks and a maker's shelf, mid-print. Two rails stand on the base with the bed tabbed onto them; the gantry frame (two uprights, the top bar, the X axis, the spool on top) straddles the rails; the print head is glued on the frame's front, the screen panel stands at the front showing the progress, and the print stands in slots in the bed: a dragon, a vase or a benchy. Assembly: set the rails in the base, press the bed onto their tabs, stand the print in the bed, set the frame and the screen

Control Console
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Control Console

A miniature for book nooks and dioramas. Control console: a miniature starship console for dioramas, sci-fi scenes and book nooks. Two shaped sides hold a sloping control deck in sloping slots and an upright screen bulkhead behind it; a front, a back and a top tab in and close the box. The deck is engraved with switches, sliders, a lit display and the big red button under its guard, with a sticky note beside it; the screens show a wave and a radar sweep. Assembly: push the deck, the screens, the front and the back into one side, add the other, press the top onto the sides' tabs.

Cat Tree
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Cat Tree

A miniature for book nooks and dioramas. Cat tree: a miniature cat tree with its cats, for dioramas, dollhouses and every cat person's shelf. Two cross-lapped posts wrapped in sisal: the tall one carries a platform that slides down over its narrow top and rests on the step where the post widens, and a perch on its top; the short one a carpeted den with a round doorway (and eyes in the dark inside). Cats stand in slots on the platform, the perch and the den. Assembly: slide each pair of posts together, stand them in the base, drop the platform onto its step, press the perch on, build the den on