Volver: Comunidad
MyLaserTools.com

L-Square

L-square: a try square for marking and measuring, with scales along both arms that start from the inside of the stock, so the zero sits on the board's edge…

por Kerf Designs

Configuración

Square

Blade
Length of the blade, from the inside of the stock
Stock
Length of the stock
Blade width
Width of the blade
Stock width
Width of the stock
Units
Scale units
Holes
Pencil holes every this many scale steps, 0 for none

Material

Grosor del material
La plancha que cortas. Las ranuras y pestañas se ajustan a ella.
Kerf
Ancho del material que quema el láser.
Pencil
Pencil hole diameter

Vista previa 3D

Creando tu modelo
Paleta inspiracional

Código

Copiar al Banco de trabajo

Fotos

L-Square

Sobre este diseño

Corte láser e Impresión 3D

L-square: a try square for marking and measuring, with scales along both arms that start from the inside of the stock, so the zero sits on the board's edge. The stock is three layers thick and hooks over the edge; the blade is one. A row of pencil holes along the blade marks lines parallel to the edge, and a 45° face on the stock marks mitres. Choose millimetres or inches. Assembly: glue a stock layer on each face of the square's short arm, lining up the inside edges exactly. Check it against a known square.

Día del PadreHerramientas
toolsworkshop

Uso personalUso comercial

¿Qué significa esto?

Cómo hacerlo

  1. 1Cambia los ajustes. La vista previa se actualiza tras cada cambio.
  2. 2Descarga el SVG para tu láser o ábrelo en el Editor de diseños para añadirle más cosas.
  3. 3Dale me gusta al diseño y añade abajo una foto de lo que hiciste.

Preguntas

Sí. Puedes descargarlo y usarlo gratis según su licencia.

Sí. Cambia los ajustes en esta página y la vista previa se actualiza al momento. Cuando te guste, descarga el archivo.

Un SVG para tu software láser. También puedes abrirlo en el Editor de diseños o descargar STL y 3MF con el grosor del material para imprimir las piezas.

El tamaño depende de los ajustes de esta página, y el recuadro de tamaño bajo la vista previa muestra el resultado.

Ajusta el grosor del material a la plancha que cortas. Las ranuras y pestañas se adaptan a él.

Sí. La licencia cubre el uso personal y comercial de las piezas que hagas.

Hecho por la comunidad

¿Lo cortaste? Comparte una foto y una nota sobre cómo salió y recibe 10 chispas al instante.

Lo hice

Más de Kerf Designs

Locker Stall
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Locker Stall

A miniature for book nooks and dioramas. Locker stall: a miniature team locker with the player's jersey, for dioramas, shelves and a gift to any player. Two sides hold the back, a kick panel, a bench seat, a helmet shelf and a name board, all tabbed in; the jersey (team colours, name, number) hangs by a hole in its hanger on a peg tabbed into the back. Skates or cleats can stand on the seat, the helmet on the shelf. Hockey, soccer, basketball or baseball. Assembly: push the back, the kick panel, the seat, the shelf and the name board into one side, add the other, push the peg into the back, ha

Vampire Coffin
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Vampire Coffin

A miniature for book nooks and dioramas. Coffin: a miniature vampire's coffin for dioramas, Halloween and book nooks. A true coffin shape from every side: a stack of coffin-shaped rings on a solid floor, aligned by two keys that stand in the floor's slots and slide through notches in every ring; no corner joints to show. The lid is two layers, closed or slid half open on the velvet and the rose inside. It can stand on a stone plinth. Assembly: stand the keys in the floor, thread the rings down over them, glue each, lay the lid on; set it all on the plinth.

Library Bookcase
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Library Bookcase

A miniature for book nooks and dioramas. Library bookcase: a miniature bookcase with its rolling-style ladder, for dioramas, dollhouses and book nooks. The bookcase is a tab-and-slot box of sides, a back, shelves and a top, with rows of books standing in slots on every shelf and, with the ladder, a brass rail tabbed across the front. The ladder's two rails lean back to that rail and hook over it through notches in their tops; its treads tab into the rails and its feet stand in the base. One book on the top shelf has a ribbon bookmark with an initial on it. Assembly: build the bookcase and stan

Bread Rack
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Bread Rack

A miniature for book nooks and dioramas. Bread rack: a miniature bakery rack for dioramas, shop fronts and book nooks. Two ladder ends (legs, a band at every shelf, cut-outs between) hold slatted shelves tabbed into them, and the bread stands in slots on the shelves: round loaves, croissants, and baguettes in a basket on top. Assembly: push the shelves into one ladder end, add the other, stand the bread in its slots, set the feet in the base.

Diseños parecidos

Joiner's Bench
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Joiner's Bench

A miniature for book nooks and dioramas. Joiner's bench: a miniature traditional woodworking bench for dioramas, book nooks and a woodworker's shelf. Two end frames (a leg front and back, a rail at the top, a stretcher low down) with two long stretchers through the legs, the top in two glued layers with the legs' tenons showing through it, and the face vise hung from the top's front on a tab with its handle engraved on the face. A half-built chair, the plane with its shaving and a mug of coffee can stand on the top. Assembly: slide the long stretchers into the end frames, glue the two layers o

Workbench
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Workbench

A miniature for book nooks and dioramas. Workbench: a miniature workshop bench for dioramas, garages and book nooks. Two end frames (legs, a top rail and a shelf band, each one piece) hold a slatted shelf and a front and a back apron between them, and lock into a butcher-block top. A vise, a radio and a mug can stand in slots on the top. Assembly: push the shelf and the aprons into one end frame, add the other, press the top onto the frames' tabs, stand the things on top.

Motorcycle on a Lift
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Motorcycle on a Lift

A miniature for book nooks and dioramas. Motorcycle on a lift: a vintage café racer for dioramas, garages and book nooks, standing on a scissor lift table. The bike is a layered profile: the body (front wheel, fork, frame, engine, seat, exhaust, and a paddock stand under the swingarm, because its rear wheel is off for repair) is one piece standing in two slots in the lift's top; the tank and the engine covers are glued on both faces for depth, and the handlebar crosses the riser in a halving joint. The rear wheel stands in its own slot beside it. The lift is a top plate on two one-piece scisso

Model Car Display Cabinet
PersonalizableGratis
Corte láserImpresión 3D
por Kerf Designs

Model Car Display Cabinet

A miniature for book nooks and dioramas. Three-shelf model display with two doors and five layered racers. Car 07 is on the workbench. Its numbered tag takes the empty bay.